Solar Powered Led Street Light With Auto Intensity Control

Model: 66

Solderable DIY project kit for Engineering & Diploma students Worldwide

Do-It-Yourself Kit :

Includes complete hardware comprising of discrete components, modules, PCB, controller etc. and tested program code for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. (Tool kit-Multimeter, Soldering iron and program burner not included in the kit)

Warning: Division by zero in /home/edge/public_html/wp-content/plugins/woocommerce/templates/single-product/add-to-cart/simple.php on line 30

Discount 0 % Off

DESCRIPTION



Overview

The project is designed for LED based street lights with auto intensity control using solar power from photovoltaic cells. As awareness for solar energy is increasing, more and more individuals and institutions are opting for solar energy. Photovoltaic panels are used for charging batteries by converting the sunlight into electricity. A charge controller circuit is used to control the charging.
Intensity of street lights is required to be kept high during the peak hours. As the traffic on the roads tends to decrease slowly in late nights, the intensity can be reduced progressively till morning to save energy. Thus, the street lights switch ON at the dusk and then switch OFF at the dawn automatically. The process repeats every day.
High Intensity Discharge lamps (HID) used for urban street light are based on principle of gas discharge, thus the intensity is not controllable by any voltage reduction method as the discharge path is broken. LED lights are the future of lighting, because of their low energy consumption and long life they are fast replacing conventional lights world over. White Light Emitting Diode (LED) can replace the HID lamps where intensity control is possible by pulse width modulation. The intensity control helps in saving energy during late nights while traffic density on the streets is low. A programmable microcontroller of 8051 family is engaged to provide different intensities at the different times of night using PWM technique, for energy saving for solar based system, using a charge controller for battery charging, overload and deep discharge protection.
Further the project can be enhanced by using time programmed dusk to dawn switching based on latitude and longitude of a specific place. It can also be interfaced to a LDR to follow the switching operation precisely.

DIFFERENTIATORS

Easy to use, Self-explanatory kit.

All-inclusive solution kit.

Extensive audio-visuals available.

Branding-free material.

Microcontroller

Call/mail for Tech Support from 10 am – 7 pm.

Can be Customized for Arduino, Raspberry Pi, PIC

TECH SPECS

Hardware Requirements

  • 8051 series Microcontroller
  • White LEDs
  • Resistors
  • MOSFET
  • Regulator
  • Diodes
  • Solar Panel
  • Transistors

Software Requirements

  • Keil compiler
  • Embedded C or Assembly

Q & A

Buyer Feedback

Write a new review
  1. Rated 5 out of 5

    Pandya jay h

    Through Browsing I come to know about Edgefx. I decided to buy a kit from Edgefx I directly purchased the project online.

  2. Rated 4 out of 5

    DCV JAYASANKAR

    Yes the kit delayed to me at time with right components and he provided the support number while the delivery of my kit.All my queries were cleared.Yes of course I already recommend to juniors.

  3. Rated 4 out of 5

    Malvika Kamat

    Yes the kit delivered on time with the right components.All my technical queries were cleared.It’s was an extreme experience to build the project on my own.Yes I recommend to my friend even he ordered the project from Edgefx.

  4. Rated 5 out of 5

    Siddharth Dutta

    The kit was delivered on time.Technical assistance was very helpful.I had purchased readymade kit.I will recommend because I like the kit and project material.I already informed to my friends about Edgefx.

  5. Rated 4 out of 5

    Pandya Jay

    I came to know about Edgefx through my senior because even he had taken the project from Edgefx. I know the website URL.I decided to buy a kit by seeing the output video in the website.Yes the kit delivered on time with the right components.No Suggestions.