Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 312    
Rs. 0
Out of Stock
Discount 20%
Buy
Rs. 0
Out of Stock
Discount 20%
Buy
Rs. 9,399
Rs. 7,519
2 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The main aim of the project is to acquire data of distribution transformers remotely by GSM modem or XBEE. For this real-time scenario we can take one temperature sensor, 3 potential transformer and 3 current transformer for monitoring these 3 data of the transformer and then send the same to a remote location.

3 analog value are taken in multiplexing mode connected to a programmable microcontroller of 8051 family through an IC ADC 0808. Then the values of all the sensors are sent sequentially as per the frequency of multiplexing of the ADC by MC .They are then sent directly to XBEE module operating at 2.4GHz for transmitting the same data.

Remote receiver is also a microcontroller based unit that receives not only the real time data but also the error signal along with to operate corresponding realy for any action with LCD display.

The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller and other components.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
XBEE Based Remote Monitoring of 3 Parameters on Transformer / Generator Health    
Hardware Requirements
  • Microcontroller, LCD display
  • A to D converter
  • Temperature sensors
  • Relay
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Transistors
  • PT
  • CT
  • RF/XBEE module as required
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
  • Languages: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What are the parameters monitored in this project?
A:  Voltage, Current and Temperature are the parameters monitored in this project.
Q:  What is the frequency range for XBEE module?
A:  Frequency range for XBEE module is 2.4GHz.
Q:  What is the maximum range for XBEE module?
A:  The maximum range for XBEE module is 10 feet.
READ WHAT OTHERS HAVE SAID
Average Rating
 4.8/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 4 of 8 reviews Show All
Urmilesh, Allahabad on 7th July, 2014, 02:44 PM

I saw your website and like your projects and service that’s why I purchased the project from Edgefx. Everything is fine from Edgefx and giving a good service and solutions. I like my complete project.

Poonam, Allahabad on 30th June, 2014, 07:07 PM

Our seniors advised us to buy from Edgefx. Edgefx teaches us everything like assembling, soldering etc. It inspired us to make other new projects.

Pooja singh , Allahabad on 30th June, 2014, 06:55 PM

I decided to buy a kit from Edgefx because there we get a chance to learn everything what faculty teaches in the college.I like the complete kit.

Sudha gupta, Allahabad on 30th June, 2014, 06:54 PM

Edgefx gives us the free facility to learn, how to assemble and how to do any project ourselves. While others only provide us ready made kit.No, we didn’t expect that this kind of service will be provided i.e., they teach us everything like assembling, soldering etc. It inspired us to make other new projects.Please maintain this as it is.

Rating Breakdown (8 Reviews)
7
1
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved