Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 346    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 0

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main aim of the project is to process the real time data acquisition wirelessly under supervisory control for large scale remote industrial environment. In large industrial establishments many processes go on, therefore it is essential to monitor all the processes and control the factors affecting them. Adapting a technology like WIRELESS SCADA (Supervisory Control and Data Acquisition) one can achieve the above mentioned objective effectively, and thus saving a lot of manpower.

For achieving this real-time scenario, a temperature logging system for a remote plant operation is taken. Here temperature sensors are duly interfaced to the 8051 microcontroller. Data collected from the temperature sensors are constantly sent over 2.4 GHz transmitter wirelessly to the microcontroller which is then received at the matched 2.4 GHz USB type receiver connected to a PC / Laptop. At the front end, “DAQ System” (software) is loaded on the computer which takes these values and displays them on its front panel, and also logs them in the database.

One can set parameters like set point, low limit and high limit on the computer screen. When the temperature of a sensor goes beyond set point the microcontroller sends a command to the corresponding relay. The heaters (shown as lamps) connected through relay contacts (corresponding to their sensors) are turned OFF (or ON in vice versa). High limit and low limit features are available for generating an AV alarm on the PC in the event of system failure. Hence, processes at hazardous areas can be controlled with more accuracy and better safety using SCADA. Adapting such a technology will save both money and time.

NOTE: This project is tested on Windows XP operating system. For other operating system please copy the relevant files from any XP system as explained in the net.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Easy Wireless Interface to PC/Laptop.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Wireless SCADA
Hardware Requirements
  • 8051 series Microcontroller
  • ADC
  • Temperature sensors
  • Max232
  • Relay Driver IC
  • Crystal
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Relays
  • Transistors
  • DB9 connector
  • Loads
  • 2.4 GHZ Tx & Rx module.
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
Q & A
Q:  What is wireless SCADA? Where is it used?
A:  Implementing a centralized control system for real time industrial processes using wireless media is known as wireless SCADA (supervisory control and data acquisition). It is used at industries and here control is possible till 100 feet.
Q:  Can I replace lamp with any industrial load?
A:  Yes, one can replace lamp up to 200W
Q:  What are the parameters monitored in this system?
A:  Temperature is monitored using analog temperature sensor LM35
Q:  How can one monitor the industrial loads?
A:  By user friendly GUI software which is provided with the kit, one can monitor the industrial loads.
Average Rating
Please enter security code
Showing 4 of 6 reviews Show All
Kaushik Billakanti, Visakhapatnam on 19th January, 2016, 04:55 PM

I searched for the words like Wireless SCADA to find Edgefx in Google.
I found my project Title so decided to buy that project from Edgefx. I like the project report provided along with the kit.

Harsh, Mumbai on 2nd June, 2015, 10:49 AM

I come to know about Edgefx through friend named Siddhartha. I decided because I want to buy the project. I like the Documentation in my kit.Yes the kit delivered on time with the right components.I purchased through online.

SHUBHAM SONI, GURGAON on 30th May, 2015, 04:22 PM

Yes the kit delivered on time with the right components.Some of my queries were cleared and even I have software related doubts I will make a call during the submission.It’s good while building the project.I recommend to my class mates.

Shubam soni, Gurgaon on 31st December, 2014, 11:43 AM

The kit delivered on time with right components.The technical support is good.

Rating Breakdown (6 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved