Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 365    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 21,599

Rs. 19,440

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project is designed to  transfer power wirelessly to one or  more  DC motors  for an electric car or train  without requiring any fuel /battery or electrical connection to run it in a specified path by inductive resonance coupling at the ground level  fixed coil developing  a 40 KHz power  from the mains AC source.

 Wireless power transfer makes a remarkable change in the field of electrical engineering  and  eliminates the usage of conventional copper overhead wire for train. Based on this concept, the project is developed to transfer power to a  robotic vehicle or electric car or electric train wirelessly.

This project can also be used for high-power charging batteries in conventional electric cars wirelessly while on the run. Since charging of the battery is not possible to be demonstrated, the project has a robotic vehicle that runs totally through wireless power.

This project is built upon an high frequency PWM inveter circuit with a gate-driver IC to drive a MOSFET based half bridge system .It first converts AC 230V 50Hz to AC 18V   using a step-down transformer and then that is converted to DC which powers the high frequency inverter.

This output is fed to a tuned coil forming the primary of an air-core transformer. A high-frequency AC is fed to the primary coil with a capacitor to make a resonance tuned circuit. The primary coil is placed under the road that gets inductively coupled to the secondary coil mounted on the moving vehicle to wirelessly receive power to drive the robotic vehicle DC motor after being rectified. 

Moreover, this technique can be used in number of other applications too such as to charge a mobile phone, iPod, laptop battery, and propeller clock ,or any moving object wirelessly. And also, this kind of charging provides a far lower risk of electrical shock as it would be galvanically isolated. 

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Wireless Power Driven Car or Train
Hardware Requirements
  • Diodes
  • Capacitors
  • Resistors
  • 8051 series Microcontroller
  • 7- Segment Display
  • IR LEDs
  • Photo Diodes
  • Motor Driver IC
  • Battery
  • Crystal
  • LEDs
  • Buzzer
  • DC Motors
Software Requirements
  • Keil compiler
  • Language:Embedded C or Assembly
Battery not included in the kit due to Courier service prohibition. Please buy NI-CAD LEAD ACID Rechargeable 6V battery for this project.
Average Rating
Please enter security code
Showing 4 of 4 reviews
K Suganya, Kelambakkam on 24th July, 2015, 11:25 AM

While I was searching for the fully Readymade kit then one of my buddies suggested about Edgefx.I decided because Edgefx is providing the outputted kit.Yes and the assembled kit is very helpful while submitting the project.Keep going on.

Umair khan, NEW DELHI on 2nd June, 2015, 01:09 PM

I came to know about Edgefx through Internet. While searching in the Google he got to know about Edgefx.I decided to buy a kit from Edgefx by seeing the website. I like the output kit.Yes the kit was delivered on time with the right components.Code should be improved further.

Rohit Kumar tiwary, Bangalore on 30th May, 2015, 05:25 PM

Yes it was delivered on time. All my queries were cleared related to my project but I was asked for the new implementing upcoming project but you guys regretted it.It was Awesome in one word while building the project. Yes I immediately informed to my friends regarding Edgefx while before I placed an order.

Rohit Kumar Tiwary, Bangalore on 31st March, 2015, 04:21 PM

I came to know about Edgefx through Net and Keyword I used to found it is Electrical Kits.I decided because I found it is the best among those available in the net and I like the Documentation.The kit delivered on time with right components.I directly purchased the project online.

Rating Breakdown (4 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved