Do it Yourself Kit
|A fully assembled & tested PCB||Hardware|
|A set of solderable components||Hardware|
|A set of detachable components||Hardware|
|Abstract, Circuit diagram||Soft Copy|
|Source Code||Soft Copy|
|Project Documentation, PPT||Soft Copy|
The project is designed to develop a robotic vehicle using RF technology for remote operation attached with wireless camera for monitoring purpose. The robot along with camera can wirelessly transmit real time video with night vision capabilities. This is kind of robot can be helpful for spying purpose in war fields. An 8051 series of microcontroller is used for the desired operation.
At the transmitting end using push buttons, commands are sent to the receiver to control the movement of the robot either to move forward, backward and left or right etc. At the receiving end two motors are interfaced to the microcontroller where they are used for the movement of the vehicle. The RF transmitter acts as a RF remote control that has the advantage of adequate range (up to 200 meters) with proper antenna, while the receiver decodes before feeding it to another microcontroller to drive DC motors via motor driver IC for necessary work. A wireless camera is mounted on the robot body for spying purpose even in complete darkness by using infrared lighting.
Further the project can be enhanced using DTMF technology. Using this technology we can control the robotic vehicle by using cell phone. This technology has an advantage over long communication range as compared to RF technology.
BLOCK DIAGRAM FOR TRANSMITTER SECTION
BLOCK DIAGRAM FOR RECEIVER SECTION
8051 series Microcontroller, RF tx-rx, DC Motors, Motor driver IC, Encoder, Decoder, Push Buttons, Diodes, Resistors, Capacitors, Wireless Camera.
Language:Embedded C or Assembly
War Field Spying Robot with Night Vision Wireless Camera - Project Video