Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 474    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit


Rs. 6,099

Rs. 3,660

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit.

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project is designed to detect vehicular movement on highways, and then to switch on only a block of street lights ahead of it (vehicle), and hen to switch off trailing lights to save energy.

This proposed system provides a solution that saves energy by sensing an approaching vehicle and then switching on a block of street lights ahead of the vehicle. As the vehicle passes by, the trailing lights get switched off automatically and thus we save a lot of energy. While there are no vehicles on the highway, then all lights remain off.

There is another mode of operation wherein, instead of being switched off completely, the lights remain on with 10% intensity. As the vehicle approaches, the same block of street lights switch on and reach up to 100% intensity, and then, as the vehicle passes by, the trailing lights revert back to 10% intensity again. Such kind of intensity is controlled using Pulse Width Modulation (PWM) generated by the microcontroller of 8051 family.

The sensors used on either side of the road sense vehicle movement and send logical commands to the microcontroller to switch on or off the LEDs. Thus, this way of dynamically changing  intensity helps in saving lot of energy.

Furthermore, this project can be enhanced by using appropriate sensors for detecting failed street light, and then sending an SMS to the control department via GSM modem for appropriate action.


Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Motion Sense and PWM Street Lights.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Vehicle Movement Tracked Street Lighting of Highways
Hardware Requirements
  • 8051 series Microcontroller
  • LEDs
  • Voltage Regulator
  • Resistors
  • Capacitors
  • Crystal
  • Transistors
  • Diodes
  • Photodiodes
  • IR LED
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  Can we increase the detection distance between IR Photo sensors?
A:  Yes, we can increase the detection distance, and this can be done at user end.
Q:  Can we implement this concept in real time?
A:  Yes, this concept can be implemented in real time by modification at the user end.
Q:  Can we use high power LED's rather than low power LED's?
A:  No, we cannot use high power LED's.
Average Rating
Please enter security code
Showing 3 of 3 reviews
Anindya Sinha, Siliguri on 2nd June, 2015, 04:53 PM

My senior suggested taking the kit from Edgefx.I like the Assembled kit because it is on the word that 100% output guarantee.Yes it’s delivered on time.No I purchased through online.No suggestions.

Manjusha, Bokaro on 1st June, 2015, 06:38 PM

I come to know about Edgefx through Google and I used the project as a keyword.I decided to buys a kit seems to Edgefx to use take care of it I like the Readymade kit.Yes the kit delivered on time with the right components.No I directly purchased through online.No Improvements required.

Bijo M Thomas, New Delhi on 15th April, 2015, 04:54 PM

I came to know about Edgefx through Net and Keyword I used to found it is Project Kits.I decided because I found it is the best among those available in the net and I like the Documentation.The kit delivered on time with right components.I directly purchased the project online.

Rating Breakdown (3 Reviews)

Only Tool kit can not be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved