Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 238    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 0

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main objective of this project is to develop a home automation system with a touch screen based control panel.

As technology is advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional switches to centralized control system, involving touch screen switches. Presently, conventional wall switches located in different parts of the house makes it difficult for the user to go near them to operate.

Even more it becomes more difficult for the elderly or physically handicapped people to do so. Remote controlled home automation system provides a simpler solution with touch screen technology. Touch screen control panels are also designed for commercial, industrial and medical systems.

In order to achieve this, a touch panel is interfaced to the microcontroller on transmitter side which sends ON/OFF commands to the receiver where loads are connected. By touching the specified portion on the touch screen panel, the loads can be turned ON/OFF remotely through wireless technology.

The microcontroller used here is of 8051 family. The loads are interfaced to the microcontroller using opto-isolators and triacs.

Further the project can be enhanced by using GSM modem interfaced to the control unit. Using GSM modem, the user can control home appliances by sending an SMS. Advantage of using this technology is that there is not range limitation when compared to RF technology.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Remote load switching @ ZVS point.
Low Cost Remote Home Automation.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Touch Screen based Home Automation System  
Hardware Requirements
  • 8051 series microcontroller
  • Transformer
  • touch panel
  • opto-isolator
  • Triacs
  • RF module
  • Regulators
  • Crystal
  • Diodes
  • Resistors
  • Capacitors
  • Encoder
  • Decoder
  • Lamps
Software Requirements
  • Keil compiler
  • Languages:Embedded C or Assembly
Battery not included in the kit due to Courier service prohibition. Please buy four AA CELL 1.5V batteries for this project.
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin 8051 microcontroller is used in this project.
Q:  How are the loads operated?
A:  The loads are operated using touch screen module.
Q:  What is the touch screen model used?
A:  TFT 3x3 is the touch screen model used.
Q:  Is it possible to replace the lamp with any other loads?
A:  Yes loads up to 200W each can be used
Average Rating
Please enter security code
Showing 4 of 10 reviews Show All
GAYATHRI G KRISHNAN, ADOOR on 5th November, 2015, 03:27 PM

I was searched my project Touch Screen based Home Automation System and i find edgefx in Google.
I found my project Title so decided to buy that project from Edgefx.
I have purchase through online

Harshwardhan Rathod, Pune on 20th July, 2015, 05:41 PM

Yes the kit delivered on time with right components.All my technical queries were cleared. And I give Good for the technical support.I was well satisfied in building the project.Not yet, but I will definitely recommend in future.

Syed Zakir, Chennai on 30th May, 2015, 03:53 PM

Yes the kit delivered on time.The technical support is good and I rate 4 out of 5.I felt ok while building the project.I recommend to the juniors.

sarojini, tenali on 4th December, 2014, 03:50 PM

project seems to be good

Rating Breakdown (10 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved