Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 427    
2 MATCHING PROJECTS

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 12,099

Rs. 10,890

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The project is designed to control the speed of a DC motor using a PIC16F8 series microcontroller. Speed of the DC motor is directly proportional to the voltage applied across its terminals. Hence, if voltage across motor terminal is varied, then the speed can also be varied. 

This project uses the above principle to control the speed of the motor by varying the duty cycle of the pulse applied to it (popularly known as PWM control). The project uses two input buttons interfaced to the microcontroller, which are used to control the speed of motor. PWM (Pulse Width Modulation) is generated at the output by the microcontroller as per the program. The program can be written in Assembly language or in Embedded C.

The average voltage given or the average current flowing through the motor will change depending on the duty cycle (ON and OFF time of the pulses), so the speed of the motor will change. A motor-driver IC is interfaced to the microcontroller for receiving PWM signals and delivering desired output for speed control of a small DC motor. 

 

Furthermore, the project can be enhanced by using power electronic devices such as IGBTs to achieve speed control higher capacity industrial motors.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Speed Control Unit Designed for a DC Motor using PIC Microcontroller
Hardware Requirements
  • PIC16F8 series Microcontroller
  • Crystal
  • DC Motor
  • Motor Driver IC
  • LED
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Push Buttons.
Software Requirements
  • MPLAB & CCS C Compiler
  • Language: Embedded C or Assembly
PROJECT RESOURCES
PROJECT RESOURCES
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved