Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 242    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 4,129

Rs. 2,973

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 1,499

Rs. 1,200

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes.

In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.

The proposed system will check on rash driving by calculating the speed of a vehicle using the time taken to travel between the two set points at a fixed distance. A set point consists of a pair of sensors comprising of an IR transmitter and an IR receiver, each of which are installed on either sides of the road. The speed limit is set by the police who uses the system depending upon the traffic at the very location.

The time taken by the vehicle to travel from one set point to the other is calculated by a microcontroller program. Based on that time it then calculates the speed and displays that on an LCD. Moreover if the vehicle crosses the speed limit, a buzzer sounds alerting the police.

This concept can be extended in future by integrating a camera with the system which could capture the image of the number plate of the vehicle to sends that to the traffic authorities.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Speed Checker to Detect Rash Driving on Highways
Hardware Requirements
  • Transformer
  • Diodes
  • Capacitors
  • Resistors
  • LEDs
  • IR
  • photodiode
  • Transistor
  • LCD
  • Buzzer
  • Relay
  • Lamp
  • 8051 series Microcontroller
Software Requirements
  • Keil compiler
  • Language:Embedded C or Assembly.
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin 8051 microcontroller is used in this project.
Q:  How can I adjust the speed limit?
A:  It’s pre-programmed and hence the speed limit cannot be adjusted.
Q:  Can the speed information in KMPH be transmitted to remote server for speed monitoring?
A:  No, this system has been designed only to display the speed information. Please follow model number 347 for your requirement. Link:
Q:  Is this device implemented in the real time?
A:  Yes, this device can be implemented in real time.
Average Rating
Please enter security code
Showing 4 of 6 reviews Show All
Sivaa Reddi, warangal on 14th November, 2015, 06:39 PM

I came to know about Edgefx while browsing the project sites. I used the Electronic topics in the Google to find Edgefx.
I decided to buy a project from Edgefx because by seeing the website it is really attractive and requirement of my project is available here.
I purchased through online.

Syed Nasir Raza Wasti, Bangalore on 3rd July, 2015, 11:31 AM

Yes the kit delivered on time with the right components.From CD all my technical queries were cleared and my feedback about Edgefx technical support is Very Good.I recommended to my juniors and sub juniors as well.

Chetan Liladhar Pingalkar, Nashik on 30th May, 2015, 04:52 PM

I Came to Know about Edgefx through Google. I used the Project title i.e., Speed checker to detect rash driving as a keyword.I decided because it’s Apt for my requirement. I like the Report and Service.Yes the kit delivered on time with right components.

Darshit pinesh shah, Vadodara on 30th May, 2015, 04:18 PM

Yes the kit delivered on time with the right components.All my technical queries were Cleared and Edgefx team providing good service.It’s good building the project, it happens because of Edgefx. Yes I recommend to most of friends.

Rating Breakdown (6 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved