Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 225    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit


Rs. 3,739

Rs. 2,244

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 1,759

Rs. 1,056

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit.

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The aim of this project is to develop a device to detect rash driving on highways and to alert the traffic authorities in case of any speed violation. Accidents due to rash driving on highways are on the rise and people are losing their lives because of others mistakes.

In the present system, to detect rash driving the police has to use a handheld radar gun and aim at the vehicle to record its speed. If the speed of the vehicle exceeds the speed limit, nearest police station is informed to stop the speeding vehicle. This is an ineffective process as after detecting one has to inform the same and a lot of time is wasted.

The proposed system will check on rash driving by calculating the speed of a vehicle using the time taken to travel between the two set points at a fixed distance. A set point consists of a pair of sensors comprising of an IR transmitter and an IR receiver, each of which are installed on either sides of the road.The speed limit is set by the police who use the system depending upon the traffic at the very location.

The time taken by the vehicle to travel from one set point to the other is calculated by control circuit. Based on that time it then calculates the speed and displays that on seven segment displays. Moreover if the vehicle crosses the speed limit, a buzzer sounds alerting the police.

This concept can be extended in future by integrating a camera with the system which could capture the image of the number plate of the vehicle to sends that to the traffic authorities.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Non-Microcontroller Project.
Speed Checker to Detect Rash Driving on Highways
Hardware Requirements
  • Transformer
  • Diodes
  • Capacitors
  • Resistors
  • LEDs
  • Timer
  • Decade Counter
  • IR LED
  • Photodiode
  • 7-Segment Display
  • Buzzer
  • Voltage Regulator
  • Nand gates
Software Requirements
Q & A
Q:  What is the function of 555 Timer?
A:  Here one 555 Timer IC is used in astable mode and the others are used in monostable mode.
Q:  Can the speed information in KMPH be transmitted to remote server for speed monitoring?
A:  No, this project has been designed to give the time reading and not KMPH reading. For that you can refer the links given below:
242: http://www.edgefxkits.in/speed-checker-to-detect-rash-driving-on-highways-809
347: http://www.edgefxkits.com/wireless-rash-driving-detection.
Q:  Is it possible to implement this device in real time?
A:  Yes, this device can be implemented in real time.
Q:  How can one increase the sensing distance?
A:  By using IR-reflecting sensors in place of interruption type used, one can increase the sensing distance.
Average Rating
Please enter security code
Showing 4 of 11 reviews Show All
Upamanyu Ghosh, Kolkata on 7th June, 2016, 06:33 PM

We came to know about edgefx is through searching keyword projects in google
By seeing the website it so attractive and it is easy to under
with the right components in right time I have received
support team helped me to purchase kit online
i will refer this site to our friends
i will go through your blog

sandeep poonia, Roorkee on 20th November, 2015, 05:33 PM

I came to know about Edgefx when I am searching for the components for my project.
I decided to buy a kit.
Purchased through online.

Ankita Sharma, Greater Noida on 19th November, 2015, 05:19 PM

I come to know about Edgefx through Internet. I directly searched by the title of the project.
We had seminar in our college from Edgefx and i like the topic which i can easily understand by your marketing person.
I got help in purchasing the project with the marketing person Mr.Dev desai.
Video Explanations to be elaborate more.

Ankita Sharma, GREATER NOIDA on 18th November, 2015, 11:55 AM

I come to know about your Institute through Internet and I used the Different Project topic’s as a keyword.
I decided to buy a kit by seeing the pictures in the website.
Yes I called up and someone from your team helped me to purchase.

Rating Breakdown (11 Reviews)

Only Tool kit can not be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved