Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 519    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 6,599

Rs. 5,280

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project is designed to develop a robotic vehicle that is controlled by a cell phone. DTMF commands from a phone are sent to another cell phone which is mounted on the robot. These commands are fed to the microcontroller of the 8051 family to operate the vehicle movement through motor interface.                                                                        

The commands sent from one cellphone (control end) to another interfaced with the microcontroller and mounted onto the robot (receiver end) are DTMF (Dual Tone Multi Frequency) mode commands, which are then decoded by the DTMF decoder. T

he corresponding codes are then fed to the microcontroller programmed to recognize those codes to operate DC motors through a motor-driver IC for movement in any direction according to the sent commands from the sender’s mobile.

The motors are controlled using the motor-driver IC interfaced to the microcontroller. This system uses the microcontroller from the 8051 family and a battery for power source.

Furthermore, in future, this project can be enhanced using additional motors for multipurpose activity. For example, it can be developed into pick n place robot or firefighting robot with a water pump.





Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Robotic Vehicle Movement By Cell Phone
Hardware Requirements
  • 8051 series Microcontroller
  • Crystal
  • DTMF Decoder IC
  • Motor Driver IC
  • DC Motors
  • Batteries
  • Robot Body
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is DTMF?
A:  DTMF or Dual tone multi frequency is a signaling system which uses a combination of two frequency tones to represent a key pressed on the keyboard of any cell phone.
Q:  Can this project be implemented using the landline phone?
A:  No, this project has been designed to be implemented with only a mobile phone.
Q:  What are keypad tones?
A:  Keypad tones are the audible sound heard, when a key is pressed on the mobile phone.
Average Rating
Please enter security code
Showing 1 of 1 reviews
Preeti M Sobarad, Bangalore on 5th May, 2015, 12:47 AM

The project we received worked succesfully. But the first model we got was'nt working and placed a replacement order. It was tested and worked very well. Edgefx co operated very well with all our queries. Thanks a lot !

Rating Breakdown (1 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved