Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 158    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 6,929

Rs. 4,435

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 1,330

Rs. 1,064

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main objective of this project is to provide security in an organization by allowing only the authorized personnel to access the secure area. The security of any organization is a priority for the authorities.

The concern is for the physical property and also for the intellectual property. For this reason only the authorized person with a valid RFID tag is allowed into the secured premises. This tag contains an integrated circuit that is used for storing and processing information, modulating and demodulating the radio frequency signal that is being transmitted.

Thus, once the person shows the RFID tag to the card reader it scans the data present in the tag and compares it with the data present in the microcontroller. When the data matches with that in the microcontroller, the load will be turned ON which is operated by a relay being driven from the output of the microcontroller. If a valid tag is swiped then the system displays a message “AUTHORIZED” else it states “UNAUTHORIZED” and doesn’t allow access.

A lamp is used as an indication besides the LCD display. This project can be further enhanced by interfacing it with GSM technology. Any attempt for unauthorized access can be intimated to the security personnel through an SMS. It can also be interfaced with a finger print module to reduce the drawback of RFID system i.e. exchanging RFID tags.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
RFID Security Access Control System
Hardware Requirements
  • 8051 series Microcontroller
  • RFID reader
  • RFID tags
  • Relay
  • Relay driver IC
  • Transformer
  • Diodes
  • Voltage Regulator
  • Resistors
  • Capacitor
  • LED
  • Lamp
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
Q & A
Q:  What is RFID?
A:  RFID stands for Radio Frequency Identification Device. It is a technology based identification system using tags to identify objects.
Q:  What is RFID card?
A:  RFID card is an accessory which has got a coil and a chip for the reader for data communication. While it is placed on the RFID reader device, it gets induced power from the reader and then the data present in the card is serially transmitted to the receiver.
Q:  Which type of relay is being used here?
A:  A 12V single contact relay is being used here in this project.
Q:  Is it possible to replace the existing load by a lamp?
A:  Yes, it is possible to replace the load by lamp, but limited to 200 W.
Average Rating
Please enter security code
Showing 1 of 1 reviews
srinevas mitte, nalgonda on 13th May, 2014, 12:12 PM

I have searched in google and came to know about your website and seen the past reviews.I felt that your service and products is good. Then I got confidence to purchase the project from Edgefx technology.The quality of the project and service provided by Edgefx is very good.I am satisfied.

Rating Breakdown (1 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved