Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 27    
Rs. 11,999
Rs. 9,599
50 in Stock
Discount 20%
Buy
Rs. 10,199
Rs. 8,159
50 in Stock
Discount 20%
Buy
Rs. 8,399
Rs. 6,719
52 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The project is designed to control a robotic vehicle by using a RF technology for remote operation. A low power laser light is interfaced for demonstrating the possibilities of destroying a distant object by its beam. An 8051 series of microcontroller is used for the desired operation.

At the transmitting end using push buttons, commands are sent to the receiver to control the movement of the robot either to move forward, backward and left or right etc. At the receiving end two motors are interfaced to the microcontroller where they are used for the movement of the vehicle.

The RF transmitter acts as a RF remote control that has the advantage of adequate range (up to 200 meters) with proper antenna, while the receiver decodes before feeding it to another microcontroller to drive DC motors via motor driver IC for necessary work.

A laser pen is mounted on the robot body and its operation is carried out from the microcontroller output through appropriate signal from the transmitting end. The laser light used is just for demonstration purpose and not a powerful one.

Further the project can be enhanced using DTMF technology. Using this technology we can control the robotic vehicle by using cell phone. This technology has an advantage over long communication range as compared to RF technology.

Applications:

1) This line following robot can also be modified to a walking robot in any surface by using only one motor with homemade fixtures as per the detailed instructions give.

2) Similarly the same walking robot can be attached with special magnetic material as per instructions to climb a wall of any vertical metallic surface say a refrigerator body.

Please find the link below:

http://www.edgefxkits.com/line-following-robotic-vehicle-expandable-to-walking-and-climbing-robot

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
RF Controlled Robotic Vehicle with Laser Beam Arrangement  
Hardware Requirements
  • 8051 series Microcontroller
  • Push Buttons
  • RF module
  • Encoder
  • Decoder
  • Motor driver IC
  • DC motors
  • Resistors
  • Capacitors
  • Diodes
  • Batteries
  • Laser Pointer
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
OTHER INFORMATION
Battery not included in the kit due to Courier service prohibition. Please buy eight AA CELL 1.5V batteries for this project.
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family along with a 20 pin microcontroller is used in this project.
Q:  What is the range of RF?
A:  RF range is 50 meters.
Q:  What is the operating frequency for this project?
A:  433 MHz is the operating frequency.
Q:  What is the role of laser?
A:  LASER is used here for demonstrating the possibility of deactivating an explosive bomb
READ WHAT OTHERS HAVE SAID
Average Rating
 3.5/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 2 of 2 reviews
Ekta Bharti, Delhi on 18th November, 2015, 11:41 AM

While I was searching for the projects, my friend informed me about the URL i.e., www.edgefxkits.com.
I decided to buy a kit from Edgefx because the kit is assembled properly.
No I directly purchased through online.

Shubhamgupta, Punjab on 25th February, 2014, 10:47 AM

I loved the kit concept.

Rating Breakdown (2 Reviews)
0
2
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved