Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 359    
2 MATCHING PROJECTS

Do-It-Yourself Kit

Rs. 0

( You Save: Rs. 0 )

Buy
  • • Product of choice for Engineering & Diploma students worldwide.
  • • Real-time applications.
  • • Mapped to the curriculum.
  • • Learning by doing.
  • • Clearly defined problem statement.
Solderable DIY kit with
"Assembled & Tested Prototype board"

DIY kit comes with an Assembled and Tested prototype board and pre-programmed controller ensuring 100% output guarantee. Includes complete hardware & tools with plain PCB for assembling project from scratch.

Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Simulation, Testing, Troubleshooting and finally building a working Hardware Prototype.

400+ end to end unique project solutions in wide areas of Electronics, Electrical, Embedded, Communication, IoT, Arduino and more.

PROJECT DESCRIPTION

The project is designed to switch industrial loads using a user programmable logic control device for sequential operation with Raspberry Pi board. This operation is generally used for repetitive nature of work.

Programmable logic controllers used in industrial applications are very expensive for simple operations like sequential switching of loads. In this project we demonstrate the working of this simple operation using a Raspberry Pi board. The development of this application requires the configuration of the program through input key-buttons. In industries, there are many tasks are carried out which requires some repeated operation in various orders and time intervals.

For example, certain loads need to be switched ON/OFF in specific time intervals. In order to achieve this, Raspberry Pi board is programmed in such a way that the loads a can be operated in three modes: Set mode, Auto mode and Manual mode. In set mode, through timers, the machinery works based on input time set by the user where as in auto mode it works on default time settings and finally in the manual mode it functions while respective key-buttons are pressed depending on the user’s need and flexibility. All the modes and status of loads are displayed on PC monitor or a TV.

Thus, tasks performed by costly PLCs can now be achieved using a Raspberry Pi board making the device cost effective. Further the project can be enhanced by interfacing it with a GSM modem where by sending an SMS to the control system we can select the mode and timing remotely.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Multi-Mode Programmable Load Switching.
Call/mail for Tech Support from 10 am - 7 pm.
Raspberry Pi Development Board.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Raspberry PI based Programmable Sequential Switching
Hardware Requirements
  • Raspberry Pi board
  • PC monitor or TV
  • Relay Driver
  • Relays
  • Resistors
  • Capacitors
  • LEDs
  • Crystal
  • Diodes
  • Transformer
  • Voltage Regulator
  • Push Buttons
  • Lamps.
Software Requirements
  • PHP GPIO program
Q & A
Q:  Which microcontroller is used in this project?
A:  Raspberry PI in-built Celeron processor is used and development board is also provided with this project
Q:  What is programmable sequential switching?
A:  This project is designed to switch on the loads sequentially upon programmable time intervals.
Q:  What are the modes available in this project?
A:  Automatic mode runs on time specified in program, with Manual mode one can manually switch on and off the load and with SET mode user can set the time for each load.
Q:  Can we place a direct load other than the lamp?
A:  Yes, we can place a load other than lamp, but up to 200W.
READ WHAT OTHERS HAVE SAID
Average Rating
 4/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Showing 1 of 1 reviews
Patel Harsh, hyd on 13th May, 2014, 03:59 PM

What project i was looking for I got the same project in your website.Support is very good and the project is given to me properly

Rating Breakdown (1 Reviews)
0
1
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved