Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 15    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 4,799

Rs. 3,456

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 1,779

Rs. 1,424

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project is designed to switch industrial loads using a user programmable logic control device for sequential operation. This operation is generally used for repetitive nature of work.

Programmable logic controllers used in industrial applications are very expensive for simple operations like sequential switching of loads. In this project we demonstrate the working of this simple operation using a microcontroller of 8051 family. The development of this application requires the configuration of the program through input switches.

In industries, there are many tasks are carried out which requires some repeated operation in various orders and time intervals. For example, certain loads need to be switched ON/OFF in specific time intervals. In order to achieve this, microcontroller is programmed in such a way that the loads a can be operated in three modes: Set mode, Auto mode and Manual mod.

In set mode, through timers, the machinery works based on input time set by the user where as in auto mode it works on default time settings and finally in the manual mode it functions while respective switches are pressed depending on the user’s need and flexibility. All the modes and status of loads are displayed on an LCD.

Thus, tasks performed by costly PLCs can now be achieved using a microcontroller making the device cost effective. Further the project can be enhanced by interfacing it with a GSM modem where by sending an SMS to the control system we can select the mode and timing remotely.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Multi-Mode Programmable Load Switching.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Programmable Switching Control for Industrial Automation in Repetitive Nature of Work
Hardware Requirements
  • 8051 series Microcontroller
  • LCD
  • Relay Driver
  • Relays
  • Resistors
  • Capacitors
  • LEDs
  • Crystal
  • Diodes
  • Transformer
  • Voltage Regulator
  • Push Buttons
  • Lamps
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What is programmable sequential switching?
A:  This project is designed to switch on the loads sequentially upon programmable time intervals
Q:  What are the modes in this project?
A:  There are 3 modes- Automatic mode (Switching loads for programmed time period), Manual mode (manually switching loads) and Set mode (manually setting the load switching time).
Q:  Can we place a direct load other than the lamp?
A:  Yes, one can place a direct load, but up to 200W .
Average Rating
Please enter security code
Showing 3 of 3 reviews
thapa bhavesh n, junagadh on 29th May, 2017, 02:51 PM

I got to know about edgefx through a marketing person from edgefx he has visited our college. So, he has suggested edgefx website. So, i have directly visited the website.
I have decided to buy project from edgefx because there was no other option. I like the kit presentation.
Sales team has helped me purchasing the project.
According to me everything was good.

G.Ruthvik Reddy., Quthbullapur. on 9th April, 2014, 10:43 AM

I decided to buy a kit from Edgefx because in the total project clear idea was given about how to do the project.The soft copy given by Edgefxhad given me alot of knowledge about the project.
You can also teachhow to design the PCB to the students.

Manoj , Govt.Polytechnic College,CURCHOREM on 8th November, 2012, 02:01 AM

I bought a project from Edgefx. I have faced small problem while doing individually. I met the Edgefx Team and they had given good explanation on how to do the project and the precautions to be taken. Thanks to Edgefx Team.

Rating Breakdown (3 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved