Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 18    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 4,659

Rs. 3,355

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 1,469

Rs. 1,176

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project uses a digital temperature sensor for precise control of temperature in medical applications or industries. This system is better than analog/thermostat system, which has poor accuracy. For example, it can used for temperature control of an incubator where maintaining a precise temperature is very important.

An incubator is an apparatus used to maintain temperature conditions suitable for a neonate (newborn baby) and used particularly for preterm births of babies. This proposed control system provides the temperature information on a display and, when the temperature exceeds the set point, then the load (i.e. heater) switches OFF. In this project a lamp is provided as a load for demonstration purpose.

The system is using a microcontroller of 8051 family. Display unit consists of four no’s of seven segment display, and are interfaced to the microcontroller. A digital temperature sensor interfaced to the microcontroller for sensing the temperature conditions.

This system also provides four push button switches for adjusting the temperature settings. Then the microcontroller continuously polls the temperature information through a digital temperature sensor and displays over the 7_segment display unit and automatically switches OFF the lamp, when the corresponding temperature exceeds the set point.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Precise Digital Temperature Control
Hardware Requirements
  • 8051 series Microcontroller
  • 7-Segment Displays
  • Temperature Sensor
  • Transformer
  • Crystal
  • Diodes
  • Voltage Regulator
  • LED
  • Resistors
  • Capacitors
  • Push Buttons
  • Relay
  • Lamp
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which temperature sensor is used?
A:  A digital temperature sensor, DS1621 is used in this project.
Q:  Will it sense the body temperature or surrounding?
A:  This project is used to sense the surrounding temperature for incubators.
Q:  Is any alarm operation feasible in this project?
A:  Yes, it is possible in situation like abnormal conditions by the relay provided.
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Average Rating
Please enter security code
Showing 2 of 2 reviews
Subhodeep Ghosh, Kolkata on 13th August, 2014, 11:09 AM

I found about Edgefx by searching in Google. The Edgefx product is delivered in time.

Harshitha, on 8th November, 2012, 02:05 AM

Edgefx provides best audio visuals to do the project. They are very helpful to me in doing the project individually. I have observed good output without facing any problems. Thanks to Edgefx Technologies.

Rating Breakdown (2 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved