Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 232    
1 MATCHING PROJECTS

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 10,099

Rs. 9,090

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The main objective of this project is to develop a pre warning system to avoid stampede in places where large gathering of people take place.

In many religious places, political rallies and places where large public gathering takes place there are chances for stampede to occur due to various reasons. This proposed system warns in advance to authorities about gathering of a large number of people in a particular place before any stampede occurs.

This project will help us develop a turbulent pedestrian flow prediction and risk management system in most of pilgrimage places, where stampede is often encountered owing to mass movement. This is achieved when a large number of pressure switches are actuated as the people start gathering in one place.

The switches are interfaced to a microcontroller of 8051 family, when a certain number of switches are pressed which exceeds the predefined number then microcontroller generates an output to switch on a buzzer alerting the authorities about a possible stampede. The status is also displayed on the LCD which is duly interfaced to the microcontroller.

Further the project can be enhanced by interfacing a GSM modem to the microcontroller so that a warning message is sent to the concerned authorities via SMS.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Over Crowd Alarm System.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Pre Stampede Monitoring and Alarm System
Hardware Requirements
  • 8051 series Microcontroller
  • Push Buttons
  • Transistors
  • Transformer
  • Voltage Regulator
  • LED
  • LCD
  • Resistors
  • Capacitor
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  Where is it used?
A:  It is used at crowded areas like temples, bus stands etc.
Q:  Can we use this system directly at any place?
A:  No, this system cannot be used directly at any place.
Q:  Can any other alert system be used?
A:  Yes, any other alert system can be used, but on demand
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Average Rating
 4.9/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Showing 4 of 4 reviews
Vivek kumar, Patiala on 2nd June, 2015, 02:04 PM

Yes the kit delivered on time with the right components.From CD all my technical queries were cleared and my personal feedback about Edgefx technical support is Very Good. I recommended to my juniors and sub juniors as well.

Siddhanth Shetty, Mumbai on 2nd June, 2015, 02:03 PM

Yes the kit delivered on right time with the right components.I am happy with your product and service.Yes of course.

Shashi Sharma, Banglore on 30th May, 2015, 02:02 PM

I received the kit on time.I had purchased Ready Made kit. Technical support was good.I had Purchased Ready Made kit.I will recommend my friends because I like the complete kit. I will refer you in the future.

Mohith, on 8th November, 2012, 05:29 AM

This is the first time that I have seen this kind of good guidance about how to do the project through audio visuals. I have completed the project without facing any problems. Thanks to Edgefx Team.

Rating Breakdown (4 Reviews)
4
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved