Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 521    
1 MATCHING PROJECTS
Rs. 7,699
Rs. 6,159
10 in Stock
Discount 20%
Buy
Rs. 6,599
Rs. 5,279
10 in Stock
Discount 20%
Buy
Rs. 5,399
Rs. 4,319
10 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

This project is designed to control a robotic vehicle using a standard TV remote. An IR sensor is interfaced to the control unit of the robot for sensing IR signals transmitted by the remote. This data is conveyed to the control unit which moves the robot as desired. An 8051 series microcontroller is used in this project as the control device.

The transmitting end uses the TV remote through which IR commands are transmitted. At the receiver end, these commands are used for controlling the robot in all directions, such as forward, backward, left and right. At the receiving end, the movement is achieved by two motors that are interfaced to the microcontroller. An RC5-based coded data sent from the TV remote is received by the IR receiver interfaced to the microcontroller.

The microcontroller program refers to the RC5 code to generate respective output based on the input data to operate motors through a motor-driver IC, as motors are interfaced to the control unit through the motor-driver IC.

Furthermore, this project can be enhanced by DTMF technology. With this technology, one can control robotic vehicle using one's cell phone. This technology has an advantage over long communication range as compared to the line of sight communication in the IR technology.

 

 

        

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Robotic Vehicle Operated by a TV Remote
Hardware Requirements
  • 8051 series Microcontroller
  • IR Sensors
  • DC motors
  • Motor Driver IC
  • Crystal
  • Resistors
  • Capacitors
  • Voltage Regulator
  • Battery
  • Robot Body
Software Requirements
  • Keil compiler
  • Language:Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is TSOP?
A:  TSOP (Thin Small Outline Package) is an IC package, which acts like a receiver for receiving the coded IR signals.
Q:  What is IR emitting device?
A:  It is a device emitting rays in infrared band, which cannot be seen by human eyes.
Q:  What is the battery rating?
A:  The battery rating is 6V, achieved by using 4 batteries of 1.5V each.
READ WHAT OTHERS HAVE SAID
Average Rating
 5/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 2 of 2 reviews
Utsav, Mumbai on 30th May, 2015, 06:27 PM

Yes the kit delivered on time with the right components.From CD all my technical queries were cleared and my feedback about Edgefx technical support is Good.I recommended to my juniors,sub juniors and friends as well.

An Maria, Bangalore on 12th March, 2015, 12:32 PM

The kit was delivered on time.I am satisfied with the kit.The kit is in working condition.I will recommend you to my friends because the quality of the kit is good.

Rating Breakdown (2 Reviews)
2
0
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved