Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 553    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 6,729

Rs. 4,845

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 2,279

Rs. 2,052

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The main aim of the project is to control multiple electrical loads remotely over internet falling under the basic principles of Internet of Things-IOT. For this real-time scenario we use an Android app on any smart cell phone with user configurable front end (GUI).

The data sent from the cell phone upon touch commands are sent through allotted IP fed to it, to any nearby wireless modem which is then received by a Wi-Fi module interfaced to a microcontroller of 8051 series, under TCP IP via networked wireless modem environment.

Relays are then driven as per the command received at the controller end to handle electrical loads. The real time data is also seen at the sending end upon a LCD display interfaced to the microcontroller that displays the status of the loads too.

 The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller , 3.3 volt for the Wi-Fi unit and other components. 

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
PC Mouse operated Electrical Load Control Using VB Application
Hardware Requirements
  • Microcontroller
  • LCD display
  • A to D converter
  • Temperature sensors
  • Relay
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Transistors
  • relays
  • WiFi module as required
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved