Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 556    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 7,119

Rs. 6,408

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 2,219

Rs. 1,998

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The main aim of the project is to acquire real-time data of distribution transformers remotely over internet falling under the category of Internet of Things-IOT. For this real-time scenario we take one temperature sensor, one potential transformer and one current transformer for monitoring T, V, I data of the transformer and then send them to a remote location anywhere in the world.

These three analog values are taken in multiplexing mode connected to a programmable microcontroller of 8051 family   through an ADC 0808. Then the values of all the sensors are sent sequentially as per the frequency of multiplexing of the ADC by MC .

They are then sent directly through an Wi-Fi module under TCP IP protocol to a dedicated IP that displays the data in real time chart form in any web connected PC / Laptop for display in 3 different charts. The real time data is also seen at the sending end upon a LCD display interfaced to the microcontroller.

 The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller , 3.3 volt for the Wi-Fi unit and other components. 

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
IOT (Internet of Things) Based Remote Monitoring of Transformer / Generator Health/ Domestic Load
Hardware Requirements
  • Microcontroller
  • LCD display
  • A to D converter
  • Temperature sensors
  • Relay
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Transistors
  • PT
  • CT
  • WiFi module as required
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved