Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 226    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 10,299

Rs. 9,270

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The aim of this project is to develop a home automation system that can be controlled remotely using a landline connection. The home automation is one of the most emerging trends in modernization of home appliance control.  Presently, conventional wall switches are located in different parts of the house and one has to physically go near them and press them to turn the loads on/off. It becomes very difficult for the elderly or physically handicapped people to do so

This system is designed to provide control of home appliances through landline by dialing the designated number for the particular load. Dialing can be done from the home phone or a call made to the home number from outside. This system is designed without engaging a programmable microcontroller but is based on digital logic using DTMF technology (Dual Tone multiple frequency) which receives the command from the landline phone to develop digital output.

This digital signal is further processed to actuate switching mechanism through relay driver to turn on/off the loads/appliances. It can be used to switch appliances from anywhere, overcoming the limited range of other infrared and radio frequency type controls. This proposed system gives a new direction to the development of home automation. 

 The concept of this system can be extended in future by giving an acknowledgement message to the user by system on the status of loads by using GSM modem.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Digital Home Automation.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Non-Microcontroller Project.
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Home Automation using Digital Control
Hardware Requirements
  • Transformer
  • diodes
  • capacitor
  • Voltage regulator
  • resistor
  • Inverter
  • Flip flops
  • De-multiplexer
  • Relay
  • 555 Timer
  • DTMF decoder
  • Opto-isolator
Software Requirements
    None
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  Can this project be used with a landline?
A:  Yes it can be used with landline phone to control the loads.
Q:  Can be used with mobile phones?
A:  Yes it can be done
Q:  What is DTMF?
A:  DTMF or Dual tone multi frequency is a signaling system which uses a combination of two frequency tones to represent a key pressed on the keyboard of any cell phone.
Q:  What is the DTMF IC is used?
A:  IC 8870 is the DTMF IC used.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Average Rating
 5/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Showing 2 of 2 reviews
Nisha , Anand on 18th November, 2014, 03:58 PM

Yes, Kit was delivered on time.It was excellent support.It was nice experience to build the project.I definitely recommend you because we got two sets of components and PCB also, and also I like assembled and tested PCB.

sowmya, on 18th November, 2012, 12:30 AM

The audio visuals provided by Edgefx technologies helped my team a lot in completing the project. We also got some good knowledge on electronics with the material provided by Edgefx Team. Thanks.

Rating Breakdown (2 Reviews)
2
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved