Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 317    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 36,099

Rs. 28,880

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main aim of the project is to acquire data of distribution transformers remotely by GSM modem. For this real-time scenario we can take one temperature sensor, 3 potential transformers and 3 current transformers for monitoring 3 phase data and any 2 more out of  vibration, moisture content, oil level of the transformer and then transmit the same to a remote location.

All 8 analog value are taken in multiplexing mode  connected to a programmable microcontroller of 8051 family   through an IC ADC 0808. Then the values of all the sensors are sent sequentially as per the frequency of multiplexing of the ADC by MC in GSM  mode of communication.They are then sent through level shifter IC MAX 232 for transmitting the same data by SMS sent periodically.

Remote receiver with another GSM modem attached to a microcontroller through MAX232 receives not only the real time data in the form of SMS but also the error signal along with to operate corresponding relay for any action with LCD display.

The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller and other components.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
GSM Based Remote Monitoring of 8 Parameters of TransformerGSM Based Remote Monitoring of 8 Parameters of Transformer
Hardware Requirements
  • Microcontroller
  • LCD display
  • A to D converter
  • Temperature sensors
  • Relay
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Transistors
  • PT
  • CT
  • GSM module as required
  • MAX232 etc
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What are the parameters monitored in this project?
A:  3 phase voltages, 3 phase currents, Temperature and any other parameter like Vibration etc are monitored in this project.
Q:  Yes, on the receiver side, a lamp is provided for indication and also the abnormal values are displayed on LCD.
A:  Yes, on the receiver side, a lamp is provided for indication and also the abnormal values are displayed on LCD.
Q:  Can one replace the lamp with any buzzer or alarm?
A:  The lamps can be replaced by any alarm or buzzer.
Average Rating
Please enter security code
Showing 2 of 2 reviews
lokesh, kphb on 13th May, 2014, 12:27 PM

I saw the website and it is good you provide total information about project. Edgefx is the well-known institution and also my guide suggested the same.You have to give what is future scope for any project in real time

naveen, hampi on 13th May, 2014, 11:20 AM

It was brilliant experience that i did my project myself, the audio visual very much useful to do projects, i have completed my project successfully.

Rating Breakdown (2 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved