Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 152    
Rs. 26,899
Rs. 18,829
50 in Stock
Discount 30%
Rs. 22,899
Rs. 16,029
50 in Stock
Discount 30%
Rs. 18,899
Rs. 13,229
50 in Stock
Discount 30%

The project is designed to develop a fire fighting robot using RF technology for remote operation. The robotic vehicle is loaded with water tanker and a pump which is controlled over wireless communication to throw water. An 8051 series of microcontroller is used for the desired operation.

At the transmitting end using push buttons, commands are sent to the receiver to control the movement of the robot either to move forward, backward and left or right etc. At the receiving end three motors are interfaced to the microcontroller where two of them are used for the movement of the vehicle and the remaining one to position the arm of the robot.

The RF transmitter acts as a RF remote control that has the advantage of adequate range (up to 200 meters) with proper antenna, while the receiver decodes before feeding it to another microcontroller to drive DC motors via motor driver IC for necessary work.

A water tank along with water pump is mounted on the robot body and its operation is carried out from the microcontroller output through appropriate signal from the transmitting end. The whole operation is controlled by an 8051 series microcontroller. A motor driver IC is interfaced to the microcontroller through which the controller drives the motors.

Further the project can be enhanced by interfacing it with a wireless camera so that the person controlling it can view operation of the robot remotely on a screen.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
  Fire Fighting Robotic Vehicle  
Hardware Requirements
  • 8051 series Microcontroller
  • Push Buttons
  • RF Tx-Rx
  • Encoder
  • Decoder
  • DC Motors
  • Relay
  • Transistor
  • Robot Body with Water Tank
  • Resistors
  • Capacitors
  • Diode
  • Battery
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly.
Battery not included in the kit due to Courier service prohibition. Please buy two NI-CAD LEAD ACID Rechargeable 6V batteries for this project.
Battery not included in the kit due to Courier service prohibition. Please buy four AA CELL 1.5V batteries for this project to be used for the Remote.
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What is the battery rating?
A:  2 numbers of 6V rechargeable batteries are usedfor receiver and four numbers of 1.5V pencil cellfor transmitter
Q:  What is the RPM of robot motors?
A:  The motor RPM is 45.
Q:  How can I control the movement of robot?
A:  By RF transmitter remote using push buttons provided one can control the robot movement in left, right, forward, reverse directions.The Nozzle movement in all directions can also be controlled.
Average Rating
Please enter security code
Showing 4 of 6 reviews Show All
Saurabh Bhadra, Nagpur on 30th May, 2015, 07:12 PM

Yes the kit delivered on time with right components.Through CD I can judge the technical support is good.It’s technically sounds good while building the project.

Puneeth, Bangalore on 30th May, 2015, 03:20 PM

Yes the kit delivered on time with the right components.All my technical queries were cleared.It’s was an extreme experience to build the project on my own.Yes even I ordered two kits. And one more kit is for my friend.

Saurabh Bhadra, Nagpur on 31st March, 2015, 04:39 PM

I came to know about Edgefx when I was searching in the Google for project kits.When I was visited the Edgefx website I saw free shipping worldwide so decided of purchasing project online. I liked the concept of providing report of the project with all the components at one place in a single kit. The kit has been delivered to me in time of 4 days with all the right components. I have referred to my friends and already placed order for another project on their behalf.

R Karteek Kumar Reddy, Visakhapatnam on 30th January, 2015, 12:51 PM

The kit delivered on time with the right components.I satisfied with the technical support provided by Edgefx. Initially I confused by seeing coding commands afterwards I understood.I will recommend Edgefx to all in future.

Rating Breakdown (6 Reviews)

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved