Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 494    
1 MATCHING PROJECTS

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 4,199

Rs. 3,402

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 1,519

Rs. 1,368

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The main goal of this project is to control speed of a fan using a standard TV remote with thyristor power control method.

A standard TV remote sends coded infrared data to a control board, which is then received by an IR sensor (at the receiver end) interfaced to a microcontroller of the 8051 family. Every time , a button is pressed on the remote, the system sends a specific coded data in infrared range. This coded data is executed by the microcontroller to deliver delayed firing pulses to thyristor through an optical isolation device.

Power to the load connected in series with the thyristor is thus controlled based on the received signal. Also, the firing angle is displayed on a 7-segment display. A lamp load is provided in place of a fan whose varying intensity demonstrates the varying power to the fan  for speed control.The lamp is provided in place of the fan for demonstration purpose only.

Furthermore, this project can be enhanced by adding more outputs from the microcontroller feeding relay drivers to switch on/off domestic loads together with the speed control of the fan.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Fan Speed Control by TV Remote
Hardware Requirements
  • OP-Amp
  • TRIAC
  • Opto-isolator
  • Resistors
  • Capacitors
  • Diodes
  • LED
  • Transformer
  • Voltage Regulator
  • 8051 series Microcontroller
  • TSOP (IR sensor)
  • 7 Segment Display
  • TV remote
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is remote AC power control?
A:  Controlling the AC power supplied to the load using a GUI based Android application is remote AC power control.
Q:  Why TRIAC is preferred instead of relays?
A:  TRIAC is a solid state device compared to a relay which is a electromagnetic device with contact pitting problem
Q:  Can I use a motor instead of the lamp?
A:  Yes, an AC motor with rating- ΒΌ HP, 230V can be used.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved