Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 472    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 5,899

Rs. 5,310

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The project is designed to drive induction motor for required application in forward and reverse directions using wireless technology. For example, an exhaust fan can be used in both the directions to allow fresh air in and to let hot air out.

This proposed system demonstrates a technology to rotate squirrel cage induction motor in both clockwise and counter clockwise directions. It also has a provision to control the direction of motor using TV remote.

When the TV remote button is pressed, it sends an IR signal in RC5 code which is received by the IR receiver called TSOP-1738. The output from the TSOP is fed to the microcontroller of 8051 family which is interfaced to a relay through a relay driver.

Thereafter, the relay switching is done in bi-stable mode for split-phase induction motor to rotate in forward and reverse directions by ensuring the series capacitor  used to change its connection from one coil to the other.

In future, the project can be enhanced by controlling the operation of the induction motor using thyristors in place of relays for noise-free operation.

Note: An induction motor is used to observe the output of the project. The Motor is not supplied along with the kit. However, it can be purchased on extra cost.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Exhaust Fan for Bidirectional Motion with Remote Control
Hardware Requirements
  • 8051 series Microcontroller
  • Crystal
  • IR Sensor
  • Relay Driver IC
  • Relays
  • Transformer
  • Diodes
  • Voltage Regulator
  • Capacitors
  • LED
  • Resistors
  • TV Remote
Software Requirements
  • Keil Compiler
  • Language: Embedded ‘C’ or Assembly.
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is the role of microcontroller?
A:  To develop a dynamic timing, the microcontroller is used.
Q:  What is the rating of motor to be used in this project?
A:  3 phase, ¼- ½ HP motor rating is used in this project.
Q:  Why bidirectional rotation of induction motor is required?
A:  Bidirectional rotation of induction motor is required to use the fan both in normal mode as well as in exhaust mode. .
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved