Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 495    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 6,699

Rs. 5,360

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



This project is designed to monitor  number of persons entering and exiting a room for electrical loads to get switched on as the first person enters and to get switched off while the last person leaves. In this system, IR sensors are used in combination with a microcontroller to monitor all the operations. This helps in saving lot of energy.

There are two pairs of sensors, each pair being kept apart at a certain distance from the other. One pair of sensors consisting of a transmitter and receiver is kept exactly opposite to the other.

The transmitting part emits modulated IR light which is received at the receiver end and is then fed to the microcontroller of the 8051 family. When the first person enters the room, the microcontroller senses it (with the help of IR sensors) and increments the count. It also displays that on a 7-segment display and also switches on a lamp load that remains on for subscquent entry of persons.

In the same way, while any person exits the room, the count gets decremented. Eventually, when the last person exits from the room, the lamp is switched off. The load operation is handled by a relay interfaced to the microcontroller.

Furthermore, this project can be enhanced by using timer arrangement in the project so that if the load switching doesn’t take place for some reason as desired, then the timer will complete the task after a prefixed time.


Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Entry Exit Counter cum Electrical Load Management
Hardware Requirements
  • 8051 series Microcontroller
  • 7- Segment Displays
  • Diodes
  • Voltage Regulator
  • Capacitors
  • Resistors
  • Transistor
  • LED
  • Push Button
  • IR LED’s
  • IR Receivers
  • 555 Timers
  • Relay
  • Lamp
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is TSOP?
A:  TSOP (Thin Small Outline Package) is an IC package, which acts like a receiver for receiving the coded IR signals.
Q:  What is IR emitting device?
A:  It is a device emitting rays in infrared band, which cannot be seen by human eyes.
Q:  Can this project be implemented in industries?
A:  Yes, this project can be implemented in industries.
Average Rating
Please enter security code
Showing 3 of 3 reviews
A.Sripoorani Jayashri, Tamil Nadu on 19th November, 2015, 05:26 PM

I came to know about Edgefx while browsing the project sites. I used the Electronic topics in the Google to find Edgefx.
I decided to buy a project from Edgefx because by seeing the website it is really attractive and requirement of my project is available here.
I purchased through online.

JITIKSHA SHAH, MUMBAI on 13th November, 2015, 06:15 PM

I was referred through my sir about edgefx.
My sir helped us in taking of this project and i have gone through the example of ppt’s,abstract and so on,that’s i like a most and having in depth theory about this project.
with the help of my sir ,we purchased it through online.
it’s good.

A.Sripoorani Jayashri, Thandalam on 10th July, 2015, 05:44 PM

The Kit was delivered on time with all the right components.No technical issues with the kit.I had taken the Readymade kit.I would like to recommend Edgefx because of their Good Service.

Rating Breakdown (3 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved