Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: PIC114    
1 MATCHING PROJECTS
Rs. 11,800
Rs. 9,440
50 in Stock
Discount 20%
Buy
Rs. 8,900
Rs. 7,120
50 in Stock
Discount 20%
Buy
Rs. 5,900
Rs. 4,720
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The main objective of the project is to develop a GSM based energy meter reading system and load control through SMS. Electricity department sends employees to take meter reading every month, which is an expensive and time consuming job.

The proposed project provides a convenient and efficient method to avoid this problem. The electricity department and the user can get the readings of the energy meter of consumers via SMS. The loads can also be controlled by the user of this system via SMS using this project.

A microcontroller input is effectively interfaced to a digital energy meter that takes the reading from the energy meter and displays the same on an LCD. The reading of the energy meter is also sent to the control room by an SMS via SIM loaded GSM modem.

This GSM modem can also receive commands from the cell phone to control the owner’s electrical loads. It uses a standard digital energy meter that delivers output pulses to the microcontroller to perform counting for necessary action. On receiving command it can switch ON/OFF the loads.

Further this project can be interfaced with a non volatile memory IC like EEPROM along with a keypad so that the user the change the mobile number as per the requirement.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
GSM Remote Load Switching & Acknowledgement.
Feature - Missed Call Saving in GSM.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Energy Meter Billing with Load Control over GSM with User Programmable Number Features by PIC Microcontroller
Hardware Requirements
  • PIC16F8 series Microcontroller
  • Max232
  • GSM modem
  • LCD
  • LED
  • Crystal
  • Relay driver IC
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Opto Isolator
  • Digital Energy Meter
  • Lamp
Software Requirements
  • MPLAB & CCS C compiler
  • Language: Embedded C or Assembly
Q & A
Q:  Can I use domestic electrical appliances as loads?
A:  Yes, one can use domestic appliances as loads, provided their rating is not more than 200W.
Q:  Can I switch on the loads from anywhere and how?
A:  Yes,one can switch on the loads from anywhere and it can be done by sending an SMS.
Q:  How should one feed the phone number?
A:  One can feed the phone number by giving a missed call to the SIM number of the GSM interfaced to the controller.
Q:  Can we use this system in home directly?
A:  Yes, this system can be used at home directly.
READ WHAT OTHERS HAVE SAID
Average Rating
 4.7/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 4 of 10 reviews Show All
N.Anirudh, Trichy on 20th November, 2015, 05:46 PM

I got to know about Edgefx while I was searching for my projects in Google.
I liked the explanation of video in one word it’s Excellent.
I have been purchased directly through online.
I am satisfied.

N.Anirudh, Trichy on 1st June, 2015, 05:12 PM

My friend has referred me about Edgefx. I like the report of the project provided in the CD.The kit got delivered in time with all the right components.I have given a call on the Toll free number for placing order and I received Good assistance.I haven’t faced any difficulty in doing my project.

Siddharth Rath, Chennai on 30th May, 2015, 11:28 AM

I received the kit on time.I really satisfied at the time of building the project.My experience in building the project was very nice; study material which you provided is very understandable.Of course because I like the preprogrammed microcontroller and study material.

Apurba Mondal, Howrah on 25th May, 2015, 06:23 PM

I got to know about Edgefx through Net while I was searching for GSM based projects in Google.I find the project Title Interesting so decided to buy that project from Edgefx. I liked the Technical support provided by Edgefx.The kit got delivered to me on time as mentioned on the site and with all the right components.Before placing order I have taken help from Edgefx through chat where I got clarified with my doubts about delivery time, COD service available or not and some technical clarification on output. I would like to name Ms Suvarna who guided me while placing order.I would like to suggest you to provide PCB design or the software name since I was in need of that but still I have managed to do the PCB design by myself with the help of the video provided by Edgefx on “How to design PCB” and with some of my technical clarifications. So, at the end I was successful in designing my PCB and the faculty of us is very happy.

Rating Breakdown (10 Reviews)
10
0
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved