Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 180    
1 MATCHING PROJECTS
Rs. 18,999
Rs. 15,199
50 in Stock
Discount 20%
Buy
Rs. 16,199
Rs. 12,959
50 in Stock
Discount 20%
Buy
Rs. 13,299
Rs. 10,639
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The main objective of the project is to develop a GSM based energy meter reading system and load control through SMS. Electricity department sends employees to take meter reading every month, which is an expensive and time consuming job. The proposed project provides a convenient and efficient method to avoid this problem.

The electricity department and the user can get the readings of the energy meter of consumers via SMS. The loads can also be controlled by the user of this system via SMS using this project.

A microcontroller input is effectively interfaced to a digital energy meter that takes the reading from the energy meter and displays the same on an LCD. The reading of the energy meter is also sent to the control room by an SMS via SIM loaded GSM modem.

This GSM modem can also receive commands from the cell phone to control the owner’s electrical loads. It uses a standard digital energy meter that delivers output pulses to the microcontroller to perform counting for necessary action. On receiving command it can switch ON/OFF the loads.

Further this project can be interfaced with a non volatile memory IC like EEPROM along with a keypad so that the user the change the mobile number as per the requirement.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
GSM Remote Load Switching & Acknowledgement.
Feature - Missed Call Saving in GSM.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Energy Meter Billing with Load Control over GSM with User Programmable Number Features
Hardware Requirements
  • 8051 series Microcontroller
  • Level Shifter IC
  • GSM modem
  • LCD
  • LED
  • Crystal
  • Relay driver IC
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Opto Isolator
  • Digital Energy Meter
  • Lamp
Software Requirements
  • Keil compiler
  • Language:Embedded C or Assembly
Q & A
Q:  What is GSM?
A:  GSM stands for Global System for Mobile communications. It is a communication standard using time division multiple access technique.
Q:  What is the frequency range of GSM operates in this project?
A:  Frequency range of GSM is 900MHz.
Q:  How can I feed the mobile number?
A:  One can feed the mobile number by giving a missed call to the SIM number of the GSM modem.
Q:  Which energy meter is used?
A:  230VAC, 5-20A Digital energy meter is used
READ WHAT OTHERS HAVE SAID
Average Rating
 4.2/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 4 of 6 reviews Show All
Mohammed Asim, Karnataka on 19th January, 2016, 05:04 PM

I was searching Energy Meter Billing with Load Control over GSM with User Programmable Number Features in the Google.
I found my project Title so decided to buy that project

Priyanshu Bhashkar, Dharwad on 11th July, 2015, 03:21 PM

Mr. Arun delivered at right time with all the right components.All my technical queries were cleared. Edgefx technical support is good.Yes it’s good while building the project.No, not yet I will recommend in future.

Priyanshu Bhashkar, Dharwad on 8th July, 2015, 06:22 PM

Yes the kit delivered on time to me.Yes all my technical queries were cleared. My Experience in building the project is good.

Vidyut, on 24th March, 2013, 04:57 AM

As we expected Kit condition is good....audio visuals are helping me to get clear idea about project.....

Rating Breakdown (6 Reviews)
2
4
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved