Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 506    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 6,999

Rs. 5,600

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main objective of this project is to controla BLDC motor in electric vehicles to make it run exactly at the preset speed as saved in EEPROM (non volatile memory).An effective speed control of BLDC motor is very essential for various industrial applicationssuch as drilling, lathes, spinning, electric vehicles, elevators, etc.

This proposed system provides a very precise and effective control systemthat facilitates the user toenter a desired speed (predefined or preset speed),which is stored in an EEPROM for the motor to run at that speed. If power supply is turned off,thenthe EEPROMretains thelast speed entered. And while the supply is resumed, the motor will run at the last entered speed.

BLDC motor speed can be controlled using PWM principle. This is achieved by keeping theBLDC motor on closed loop feedback and giving an RPM reference tothe motor by a shaft mounted sensing arrangement with IR reflection, which is fed to the microcontroller in the circuit. A display unit displays the full speed and one can enter the desired percentage with the help ofswitches to vary the speed.

The pulse width would be automatically adjusted to maintain the DC power to motor such that the entered speed percentage matches thepresentRPM. The above operation is carried out by using one opto-isolator and MOSFET for driving the BLDC motor. The  IR sensing is used for getting the speed reference to themicrocontroller.

EEPROM is interfaced tothemicrocontroller.The EEPROM being a non-volatilememory, stores the speed reference to feed the control circuit, which forces the motor to always run at thesame speed. Two switches are used as input to MC for increasing or decreasing the speed of theBLDC motor. 

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
PID Speed Control with Non-Volatile Memory.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
EEPROM based Preset Speed Control of BLDC Motor
Hardware Requirements
  • 8051 series Microcontroller
  • LCD
  • Transformer
  • Voltage Regulator
  • Capacitors
  • Resistors
  • Diodes
  • BLDC Fan
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly.
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  How does the sensing take place?
A:  Sensing takes place by using IR sensor reflection arrangement.
Q:  Can I use bigger stepper/ induction motor to sense the speed?
A:  Yes any motor with reflecting surface from shaft can be used.
Q:  What is the role of EEPROM?
A:  EEPROM is used for data restoration or backup even after power interruption.
Average Rating
Please enter security code
Showing 1 of 1 reviews
Mayank Kumar, Dehradun on 2nd June, 2015, 03:50 PM

I come to know about Edgefx through my friend Mr. Prakash. I used Edgefx as a keyword in Google which is informed by my friend. I decided because my requirement matches with the project in your site. I like the components along with soft copy.Yes the kit delivered on time with the components.No I purchased through online.

Rating Breakdown (1 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved