Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 540    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 8,499

Rs. 7,650

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project is designed to control  speed of a single-phase induction motor in three steps using SCR-based, single-phase, cyclo-converter technique. A.C. motors have great advantages of being relatively inexpensive and very reliable. The induction motors in particular are very robust.

Therefore they are used in many domestic appliances such as washing machines, vacuum cleaners, water pumps, and in industries as well. Induction motor is known as constant-speed machine. The difficulty of varying its speed by a cost effective device is one of its main disadvantage. 

As AC supply frequency cannot be changed, so this project uses a thyristor controlled cyclo converter which enables control of speed in steps for an induction motor. The microcontroller used in this project is from the 8051 family.

A pair of slide switches are provided to select  desired speed range (F, F/2 and F/3) of operation of induction motor. These switches are interfaced to the microcontroller. The status of switches enables the microcontroller to deliver pulses that trigger a set of SCRs in dual bridge. Thus, the speed control of induction motor can be achieved in three steps i.e. (F, F/2 and F/3).

This very concept can be further enhanced and implemented to control the speed of a three phase induction motor. It can also be coupled with a firing angle control for achieving any desired speed.

Note: An induction motor is used to observe the output of the project. Motor is not supplied along with the kit. However, it can be purchased on extra cost.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
SCR Based Single Phase Cycloconverter
Hardware Requirements
  • 8051 series Microcontroller
  • Crystal
  • SCRs
  • Opto- isolators
  • Transformer
  • Diodes
  • LED
  • Slide Switches
  • Capacitors
  • Resistors
  • Bulb
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is a Cyclo-converter?
A:  Cyclo-converter converts a constant voltage, constant frequency AC waveform to another AC waveform of a lower frequency by synthesizing the output waveform from segments of the AC supply without an intermediate DC link
Q:  What is the rating of Induction motor used?
A:  230V, 1500RPM, ¼HP rated induction motor is used.
Q:  How can the speed be reduced?
A:  By operation modes in F(Fundamental frequency), F/2 and F/3, speed can be reduced.
Average Rating
Please enter security code
Showing 2 of 2 reviews
K Supriya, Mysore on 4th July, 2015, 12:26 PM

I found Edgefx in Google when I was searching for my Academic project.I decided to buy a kit from Edgefx because by seeing the website.The Kit got delivered to me in time with all the right components.No Improvements required.

Dudakia darshit h, Rajkot on 2nd June, 2015, 10:20 AM

I come to know about Edgefx through friend named Suraj. I directly used the Edgefx in Google.I like the components most in my kit. Yes the kit delivered on time with the right components.I purchased through online. No Suggestions.

Rating Breakdown (2 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved