Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 468    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

(Recommended)

Rs. 5,699

Rs. 3,420

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit.

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION

The main objective of this project is to design a car parking management system to enable parking of the cars without human intervention in the shopping malls and hospitals in an allocated slot by using RFID card. This system provides an ultimate solution of innovative parking for drivers and private parking owners.

RFID based car parking uses a microcontroller along with sensing circuits monitoring entry and exit of cars. The car owners are allowed an entry only when their RFID card is swiped .

The amount in the card automatically gets reduced with a display indication besides indicating the available number of parking. For loading the amount as a demo, 2 push buttons are used: SW1 for Rs500 and SW2 for 300. Example is shown for 2 cards, but it can be extended to many numbers.

An H-bridge arrangement operates the entry and exit boom motors operating clockwise and anticlockwise for opening and closing of the gate. A buzzer sound emanates only if the card is swiped. Upon every entry of a car, the parking availability gets reduced by one number while for every exit the number increases.

A standard power supply is used. A seven-segment display displays the status. A switch is used in place of RFID for minimizing the project cost.However the RFID can be supplied at extra cost.

 


PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Low Cost project without RFID.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Car Parking Management by RFID
Hardware Requirements
  • Microcontroller
  • Transformer
  • Voltage regulator(7805)
  • Capacitor
  • Resistor
  • Rectifier
  • Diode
  • H-BRIDGE
  • IR led
  • LED
  • Photo transistor
  • Seven segment display
  • Transistor (BC 547)
  • Buzzer
  • RFID Reader
  • DC motor
Software Requirements
    None
Q & A
Q:  What is the concept of this project?
A:  The concept is to switch on the load at zero crossing point using opto coupler and thyristor. The signals can be observed on any Digital Storage Oscilloscope.
Q:  Can one implement this concept using RFID cards?
A:  Yes on demand, this concept can be implemented using RFID cards.
Q:  How are the cards recharged
A:  Operation procedure is provided with the kit for recharging the cards.
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0

Only Tool kit can not be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved