Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 465    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 5,599

Rs. 5,040

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The main concept of this project is to provide a flashlight as an indication to guide the navigators in  shipyards or sea shores to their destination. The light glows based on the concept of  pulse width modulation. It is also used in middle of the sea to warn ships about the hidden rocks.

A programmable microcontroller from the 8051 family is engaged to provide flashing light at periodical intervals as per the practice followed at sea shores, shipyards, etc. A low-voltage lamp of 12V is driven by a power MOSFET in PWM mode, which is derived from a microcontroller.

The duty cycle of the PWM has to be changed depending on the type of application. As the controller gives only 5v drive, it is not possible for the MOSFET to be reliably switched ON at that voltage. An interfacing transistor is used between the controller output and the MOSFET for driving the same.

Furthermore, in future the project can be enhanced by using a high-power 230V lamp in combination with a solid-state switching for better visibility.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Aviation Obstruction Flashing Indicator
Hardware Requirements
  • Transformer
  • Diodes
  • Capacitors
  • Resistors
  • Micro controller unit
  • 12v Lamp
  • Mosfet
  • Crystal
Software Requirements
  • Keil compiler
  • Languages:Embedded C or Assembly
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  What is the concept used in this project?
A:  The project follows the concept of using inverters with high frequency transformers to generate AC signal of higher frequency.
Q:  What is the family of microcontroller is used?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What is the beacon flasher?
A:  An incandescent lamp is made to operate in flashing mode which is helpful in giving alert signals mounted on high masts/ ambulance/ aviation/ towers/ sea shores etc.
Q:  Which kind of flasher used in this project?
A:  12V DC lamp is used as a flasher in this project.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved