Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 17    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 8,939

Rs. 5,721

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 350

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 2,339

Rs. 1,872

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



In this project, a wireless communication system is designed and developed for remote patient monitoring. The primary function of this system is to monitor the temperature of a patient’s body, and display the same to the doctor through RF communication.

In hospitals, where patient’s body temperature needs to be constantly monitored, is usually done by a doctor or other paramedical staff by constantly observing the temperature and maintaining a record of it.

It is a very tedious method. In this proposed system transmitting module continuously reads patient’s body temperature through a digital temperature sensor, displays it on the LCD screen and sends it to the microcontroller which transmits the encoded serial data over the air by RF (radio frequency) through an RF module.

At the receiving end, a receiver is used to receive the data, decode it and feed it to another microcontroller which is then displayed on an LCD screen. The receiver module is kept in the doctor’s chamber to continuously display the patient’s body temperature wirelessly.

This project can be further enhanced by sensing and displaying other vital statistics of a patient like blood pressure, pulse rate etc. Another feature can be added where a warning signal is generated if the parameters cross the safe limit.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Automatic Wireless Health Monitoring System in Hospitals for Patients  
Hardware Requirements
  • 8051 series Microcontroller
  • Encoder IC
  • Decoder IC
  • LCD
  • Transformer
  • Voltage Regulator
  • RF Module
  • Temperature sensor
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
Q & A
Q:  What is the range of RF?
A:  RF range is about 50 meters.
Q:  Is it possible to transmit any parameters apart from temperature?
A:  Yes it is possible to transmit the parameters like blood pressure, Heart beat rate etc. with appropriate sensor interface.
Q:  Can any alarm be used in this project?
A:  Yes, it is feasible in the situation like abnormal conditions.
Q:  What is the temperature sensor used in this project?
A:  A digital temperature sensor, DS1621 is used in this project.
Average Rating
Please enter security code
Showing 3 of 3 reviews
Priya, india on 28th December, 2014, 07:49 PM

very good project. it'll be very useful in the future

M.V.B.Anand, on 27th April, 2013, 01:19 AM

Good project.

Venkat Bhavani, on 15th April, 2013, 02:05 AM

Good project

Rating Breakdown (3 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved