Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 156    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 6,999

Rs. 5,600

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The project is designed for using surveillance camera on a panning platform i.e. moving the camera, mounted on a DC motor in clockwise and anticlockwise direction in periodic intervals. For security reasons, surveillance cameras are used everywhere like roads, shops, colleges and offices.

Surveillance cameras are basically stationary devices therefore 360 degree coverage is not possible. However, 270 degree coverage is possible if this proposed system is interfaced with the camera along with power to control the panning speed. One can follow a moving object.

This system is interfaced with a PC where the input is given from keyboard using hyper terminal. The functionality of this circuit is, that once the PC sends a command to the microcontroller (of 8051 family) through level shifter IC (used to convert the voltage level from PC to that of the microcontroller), the microcontroller analyses this signal and activates the motor driver to drive it at the desired speed. The program on the microcontroller is executed based on the input signal from the PC to develop output to drive the motor through motor driver IC.

Further this project can be enhanced by interfacing it to a tilt arrangement for up and down movement besides 270 degree pan movement. It can also be wirelessly controlled (using RF technology) to manually adjust the camera movement or the stop the panning movement if desired with a RF remote.

NOTE: The project works only on operating systems having hyper terminal (E.g. Windows XP). The computer must have a RS232 serial port.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Hardware Requirements
  • 8051 series Microcontroller
  • Level Shifter IC
  • Motor Driver IC
  • DC motor
  • Transformer
  • Regulator
  • Crystal
  • Resistors
  • Capacitors
  • Diodes
  • LED
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
Q & A
Q:  How can I use it directly with CCTV camera?
A:  We can use the project directly with CCTV camera by mounting the camera on motor shaft
Q:  How should I control the speed?
A:  One can control the speed through hyper terminal software by entering any number from one to five.
Q:  Can the control be done wirelessly?
A:  Yes, the control can be done wirelessly at user end.
Q:  Can I increase the distance from controlling point to end point?
A:  Yes, one can increase the distance, but limited to RS 232 standard cable length
Average Rating
Please enter security code
Showing 4 of 5 reviews Show All
Shradha, Mumbai on 26th April, 2014, 04:26 PM

I tooked this project by placing an online order and i'm in very urgency at that moment only 11 days left for my project submission but thanks and grateful to Edgefx that they kept their words and did shipment within 5 working days and with proper output.

Tejaswini, Bhopal on 26th April, 2014, 04:01 PM

Hello it's being 3 months i haven taken this project and i can find myself improved in gaining knowledge not only in terms of the project but subject wise also i have improved a lot because of the ELPROCUS blog where every day they post a new article so "a new day=a new thing" to learn for me after associating with edgefx.

Tulasi, Hyderabad on 26th April, 2014, 03:14 PM

Edgefx is having a wonderful website where they have provided everything abstract,seminar presentation,output video what all required to an engineering student initially to get project accepted by their project incharge so i no need to roam here and there to get abstract or the projectlist simply sitting at one place i can download the required material and once project gets acceptance i can order the same project.

Sowmya, vishakapatnam on 26th April, 2014, 01:40 PM

Hi i have taken project kit but i was little tensed when i'm about to purchase thinking how i can complete the project with out attending any classes but thanks to edgefx for the support they have given and especially the audio visuals what they have provided is brilliant and i have completed project on my own .

Rating Breakdown (5 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved