Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 504    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

(Recommended)

Rs. 6,999

Rs. 4,200

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit.

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION

The main objective of this project is to provide uninterrupted power supply to a load by automatically selecting optimum power from any of the 4 different sources, such as solar, mains, generator and inverterto ensure continuity in the power supply.

In this project ,four switches are used in place of four different sources of power supply.When any of the switch is pressed it shows the absence of that particular source These switches are connected as input signals to the microcontroller of the 8051 family. The output ofthemicrocontroller is given to a relay-driver IC that switches appropriate relay to maintain anuninterrupted supply to theload.

The output is observed by using a lamp drawing power supply from the mains, initially for all the four sources. On the failure of the mains supply (which is actuated by pressing the appropriate switch), the load gets supply from the next available source, for instance, an inverter. If theinverter also fails, it switches over to the next available source, and so on.

The current status, as to which source supplies tothe load is also displayed on the LCD.As it is not feasible to provide all 4 different sources of supply, one source with alternate switches are provided to get the same function. However if 4 sources are available it can be modified to take power from them.

 

This project can be further enhanced by using other sources like wind power, and thentakes into consideration the best possible power source whose tariff remains lowest at that moment.

 

 

 

 

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Automatic Power Source Selection.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Auto Selection of Optimum Power from 4 Different Sources-Solar, Mains, Generator & Inverter to ensure no break power
Hardware Requirements
  • 8051 series Microcontroller
  • Relay Driver IC
  • Relays
  • LCD
  • Lamp
  • Push Buttons
  • Transformer
  • Diodes
  • Voltage Regulator
  • Crystal
  • LEDS
  • Capacitors
  • Resistors
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  What is the concept behind this project?
A:  The concept is controlling charging of capacitors using a timer in astable mode.
Q:  What is the family of microcontroller is used?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  Can the lamp be replaced by any other load?
A:  Yes, any load with rating up to 200W can replace the lamp.
Q:  Does this project work on different supplies?
A:  We don’t supply all four sources of supply in the project but only one source with 4 relays which are capable of taking supply from 4 different sources. So you can use any other 3 sources if available at your end. Please watch the video carefully.
READ WHAT OTHERS HAVE SAID
Average Rating
 4/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 1 of 1 reviews
PARVEZ AHMED, AHMEDABAD on 6th June, 2016, 04:51 PM

I got to know about edgefx through internet. I was searching my project title in google then i got to know about edgefx website. So, i have directly visited the website.
I have decided to buy project from edgefx because i found my project in edgefx website. I like most about edgefx kit was the audio visuals.
the kit was delivered with right components.
the supporting executives has helped me in purchasing the projects

Rating Breakdown (1 Reviews)
0
1
0
0
0

Only Tool kit can not be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved