Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 428    
Rs. 11,899
Rs. 9,519
50 in Stock
Discount 20%
Buy
Rs. 10,199
Rs. 8,159
50 in Stock
Discount 20%
Buy
Rs. 8,399
Rs. 6,719
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The main objective of this project is to provide uninterrupted power supply to a load, by selecting the supply source automatically from any available one  out of 4 such as: mains, generator, inverter and solar in the absence of power supply. The demand for electricity is increasing every day and frequent power cut is causing many problem in various areas like industries, hospitals and houses. An alternative arrangement for power source is thus desirable.

This project employs four switches to demonstrate / activate  respective failure of the source of power supply. When any of the switches is pressed, it shows the absence of that particular source. Switches are connected to the microcontroller as input signals.

A microcontroller of the PIC16F8 family is used. The output of the microcontroller is given to the relay driver IC, which switches appropriate relay to maintain uninterrupted supply to the load. Output is observed using a lamp drawing power  from the mains initially.

On the failure of the mains supply (which is actuated by pressing  appropriate switch) the load gets supply from the next available source ie an inverter. If the inverter also fails, it switches over to the next available source, and so on.

The current status, like which source is supplying power to the load is also displayed on an LCD. As it is not feasible to provide all 4 different sources of supply, one source with an alternate parallel arrangement is provided to get the same function for demo purposes. However 4 different sources if available they can be used.

The project can be further enhanced by using other sources like wind power also, and then can take into consideration the best possible power source – the one whose tariff remains lowest at a given moment.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Auto Power Supply Control from 4 Different Sources using PIC Microcontroller: Solar, Mains, Generator & Inverter to Ensure No Break Power
Hardware Requirements
  • PIC16F8 series Microcontroller
  • Relay Driver IC
  • Relays
  • LCD
  • Lamp
  • Push Buttons
  • Transformer
  • Diodes
  • Voltage Regulator
  • Crystal
  • LEDS
  • Capacitors
  • Resistors.
Software Requirements
  • MPLAB & CCS C Compiler
  • Languages: Embedded C or Assembly
READ WHAT OTHERS HAVE SAID
Average Rating
 5/5
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Showing 1 of 1 reviews
chinmay karaguppi, vadodara on 4th November, 2015, 05:41 PM

I was searching for projects related to auto power supply like that i find it edgefx.
Before purchasing i have queries and spoken with your technical team.So that i am interested to buy here because of very fast response and my requirement has solved.
purchased through online.
it’s a good experience.

Rating Breakdown (1 Reviews)
1
0
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved