Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 515    
1 MATCHING PROJECTS

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 7,299

Rs. 6,570

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

The main objective of this project is to provide a security system with a provision to change the password by an authorized person only. This proposed system provides a user-friendly security system for organizations and homes. This system is password based and allows only authorized person to access it with the password.

The system is fully controlled by an 8-bit microcontroller of the 8051 family. A password is stored in an EEPROM interfaced to the microcontroller which is possible to be changed anytime unlike a fixed password burnt permanently to the microcontroller.

A keypad is used to enter the password and a relay is interfaced to the microcontroller using a relay driver to lock or unlock the electric door, which is indicated by the lamp in the project. Any wrong attempt to open the door (by entering a wrong password) prompts an alert indicated by another lamp.

Furthermore, this project can be enhanced by interfacing a GSM modem to the device so that when a wrong password is entered, an alert SMS will be sent to the concerned authority.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Authorized Access with User Defined Password
Hardware Requirements
  • 8051 series Microcontroller
  • Relay Driver IC
  • EEPROM
  • Relay
  • Keypad
  • Resistors
  • Capacitors
  • LED
  • Diodes
  • Transformer
  • Voltage Regulator
  • Crystal
  • Lamps
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  What is the role of EEPROM?
A:  EEPROM is used for data restoration or backup even after power interruption.
Q:  How is the password set?
A:  Operation procedure is provided with the kit and should be followed to set the password.
Q:  What is the purpose of the lamps shown?
A:  One lamp is used to indicate for authorized entry and other lamp is used to indicate for unauthorized entry.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved