Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 353    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 11,599

Rs. 9,280

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main objective of this project is to unlock a garage door by an android application using a unique password entered through the android application device. Opening and closing of garage door involves human labor. In this proposed system, the opening and closing of a garage door is achieved by using an android application.

The owner can connect android application device to the system through Bluetooth, which in turn is connected to an ATMEGA microcontroller controlled garage door that can open/close the door by entering the password. Entering a wrong password generates a buzzer alarm.

Remote operation is achieved by any smart-phone/Tablet etc., with Android OS, upon a GUI (Graphical User Interface) based touch screen operation. This project is based on the android application, android application send data through Bluetooth. 

Another Bluetooth device connected at the receiving end which is fed to the ATMEGA microcontroller. The sent data (password entered by the user) matches with the password stored in the microcontroller, and then the microcontroller can initiate a mechanism to open the door through a relay operated motor. The project however is supplied with a lamp in place of the motor

Further this project can be incorporated with an EEPROM i.e., a non-volatile memory so that the password can be changed by the owner.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
ATmega based Garage Door Opening
Hardware Requirements
  • ATmega series Microcontroller
  • Resistors
  • crystal
  • Capacitors
  • Diodes
  • Transformer
  • Voltage regulator
  • Buzzer
  • Relay
  • Lamp
Software Requirements
  • Language: ARDUINO Programming Language
Q & A
Q:  Which Android phone do I need to operate this project?
A:  Any mobile phone which has Android OS can be used in this project.
Q:  How can I install the Blue control App used for the project?
A:  Go to Google Play in your Android mobile search for Blue control App, select and install the blue control App.
Q:  How can I connect blue control?
A:  One can connect blue control by pairing and then connecting, which is explained in detail in the operation procedure provided along with the kit.
Q:  How much distance does Bluetooth support?
A:  Bluetooth can support distance about 50 feet
Average Rating
Please enter security code
Showing 1 of 1 reviews
Sanjay Sahoo, Bhubaneswar on 24th February, 2014, 05:42 PM

It was brilliant experience that i did my project myself, the audio visual very much useful to do projects, i have completed my project successfully.

Rating Breakdown (1 Reviews)

Tool kit cannot be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved