Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 419    
1 MATCHING PROJECTS
Rs. 12,799
Rs. 10,239
50 in Stock
Discount 20%
Buy
Rs. 10,899
Rs. 8,719
51 in Stock
Discount 20%
Buy
Rs. 8,999
Rs. 7,199
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

In the present system, mostly  lightning up of streets is done through High Intensity Discharge lamps (HID), whose energy consumption is high. Furthermore, there is no specialized mechanism to turn on the Highway light in the evening and switch off in the morning.

Its intensity also cannot be controlled according to the requirement so there is a need to switch on to an alternative method of lightning system, i.e., by using LEDs. This system is built to overcome the present day drawbacks of HID lamps.

This system demonstrates the usage of the LEDs (light emitting diodes) as the light source and its variable intensity control, according to the requirement. LEDs consume less power and its life time is very high , as compared to the conventional HID lamps.

Most  important and interesting feature is that LED intensity can be controlled according to the requirement during non-peak hours which is not feasible in HID lamps. Moreover, a light sensing device LDR (Light Dependent Resistance) is used to sense the light, whose resistance reduces drastically in  the day light to disable the control power to the LEDs.

A cluster of LEDs are used to form a street light. The Arduino contains programmable instructions which controls the intensity of lights based on the PWM (Pulse width modulation) signals generated.

The intensity of lights is kept high during the peak hours, as the traffic on the roads tend to decrease slowly in the late nights; the intensity also decreases progressively till morning. Finally it completely shuts down at morning 6, and again resumes at 6pm in the evening. The process is repeated.

This concept in future can be enhanced by integrating it with the solar panel, which converts the solar intensity into corresponding voltage, and this energy is used to feed up the highway lights.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
Arduino Managed High Sensitive LDR based Power Saver for Street Light Control System
Hardware Requirements
  • Transformer
  • Diodes
  • Capacitors
  • Resistors
  • LEDs
  • Arduino dev board
  • White LEDs
  • Day/Night sensor
  • MOSFET
  • Crystal.
Software Requirements
  • Arduino software
  • Language: Arduino Programming language
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved