Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Arduino based LED Street Lights with Auto Intensity Control
Model: 550    
3 MATCHING PROJECTS

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit

Rs. 9,999

Rs. 9,000

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit

(Recommended)

Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB

(Optional)

Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit. (Can be purchased later)

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )

Buy

PROJECT DESCRIPTION
PROJECT DESCRIPTION
PROJECT DESCRIPTION

White Light Emitting Diodes (LED) replace HID lamps in street lighting system to include dimming feature. An Arduinoboard is used to control intensity automatically by developing pulse width modulated signals that drives MOSFET to switch a set of  LEDs accordingly to achievea desired operation.

This system is built to overcome present-day drawbacksof HID lamps. This system demonstrates the usage of LEDs (light emitting diodes) as light source and its variable intensity control, as per requirement.

LEDs consume less power and their lifetime is more,as compared to conventional HID lamps Moreover LED intensity can be controlled as per therequirement during non-peak hours, which is not feasible in HID lamps.

The Arduino boardcontains programmable instructions that control the intensity of lights based on PWM (Pulse width modulation)signals generated. The intensity of lights is kept high during peak hours.Asthe traffic on the roads tend to decrease slowly in late nights, the intensity also decreases progressively until morning. Finally the intensity completely shuts down in the morning at 6 A.M, and again resumesat 6 P.M. in the evening andthis process is repeated.

This concept in future can be enhanced by integrating it with a solar panel that converts solar intensity into corresponding power, and this energy is used to feed the highway lights.

PROJECT HIGHLIGHTS
PROJECT HIGHLIGHTS
PROJECT DESCRIPTION
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm.
Arduino Development Board.
Can be Customized for Arduino, Raspberry Pi, PIC
BLOCK DIAGRAM
BLOCK DIAGRAM
BLOCK DIAGRAM
Arduino based LED Street Lights with Auto Intensity Control
Hardware Requirements
  • Transformer, Diodes
  • Capacitors
  • Resistors
  • LEDs
  • ATmega AVR series Microcontroller
  • White LEDs
  • MOSFET
  • Crystal
  • Arduino Board
Software Requirements
  • Language: Arduino Programming Language
PROJECT RESOURCES
PROJECT RESOURCES
PROJECT RESOURCES
Q & A
Q:  Which kind of street light is used in this project?
A:  A string of white LEDs are used as street lights and also white LEDs are better than the conventional HID lamps used as street lights.
Q:  What is the family of microcontroller used?
A:  Here a 40 pin microcontroller from 8051 family is used.
Q:  What is the auto intensity control?
A:  Automatically controlling the intensity of street light according to the peak traffic hours in the night time and completely switching off at the day time is auto intensity control.
Q:  What is the concept or technique used in this project?
A:  PWM technique is used in this project.
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Price
Value
Rating Breakdown (0 Reviews)
0
0
0
0
0
RECENTLY VIEWED PROJECTS
RECENTLY VIEWED PROJECTS

Tool kit cannot be purchased individually.

SIGN UP FOR NEWSLETTER

Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved