Hi Guest
e.g. - "communication: RFID" Search tips
Find Projects
Model: 453    

Solderable DIY project kit for Engineering & Diploma students

Product of choice for Engineering & Diploma students worldwide.

Do-It-Yourself Kit


Rs. 4,399

Rs. 2,640

Includes complete hardware with plain PCB and a pre-programmed controller for building the project. Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Testing, Troubleshooting and finally building a working hardware project.

Tool Kit


Rs. 0

Includes Digital Multimeter, Soldering Iron, Screw driver, Cutter, to be used with Do-It-Yourself Kit to build the project.

Loaded and Tested PCB


Rs. 0

Pre-soldered and tested PCB. Choose this option only if you are short on time. Only works along with the Do-It-Yourself Kit.

Total Rs. 0

Rs. 0 ( You Save Rs. 0 )



The main objective of this project is to check the phase sequence of a 3-phase supply. While the supply is applied in correct sequence a set of LEDs indication runs in rotating display with respect to direction of phase sequence. Whenever any phase sequence is altered, then this system gives  this set of LEDs indication in rotating display alternatively clock wise and anti- clockwise meaning out of synchronization in order to protect the sensitive loads in the industries.

In this project, direct 3-phase AC supply 50Hz is fed through a voltage-drop arrangement duly stabilized by zenor diodes to a logic circuit comprising of NAND gates and OR gates to detect the proper sequence of the RYB by a series of pulses of fixed duration.

In the event of changing the sequence from RYB to say YBR, the combination of NAND and OR gates develops an output with a missing pulse during the fixed-time duration. This pulse is used in triggering an input signal to a 8051 series programmed microcontroller through a timer IC to drive LEDs accordingly which are placed placed in a circle.

In proper sequence the LEDs run clockwise after having received no triggering. While the sequence is not there the triggering is done, which is indicated by LEDs running clockwise for some time and then anti clockwise for the next and so on. The DC requirement of the circuit is powered by a step-down transformer along with a bridge rectifier, regulators and filter capacitor.

Furthermore, this project can be enhanced by providing a relay to the circuit to cutoff the supply to the load.

Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Digital Phase Sequence Indicator.
Call/mail for Tech Support from 10 am - 7 pm.
Can be Customized for Arduino, Raspberry Pi, PIC
Non-Microcontroller Project.
3 Phase Sequence Checker by LED Indication
Hardware Requirements
  • Transformer
  • Diodes
  • Voltage Regulator
  • Capacitors
  • LED
  • Resistors
  • NAND Gate
  • OR Gate
  • 555 Timer
Software Requirements
  • Keil Compiler
  • Language: Embedded ā€˜Cā€™ or Assembly.
Q & A
Q:  Which microcontroller is used in this project?
A:  The microcontroller used in this project is a 40 pin IC from 8051 family.
Q:  Where is it applicable?
A:  It is applicable in distribution system, Home appliances like geyser etc.
Q:  What is phase sequence checker?
A:  It checks the order of phase R-Y-B
Q:  Why it is needed?
A:  It is needed to run motor in desired direction
Average Rating
Please enter security code
Showing 2 of 2 reviews
Utkarsh, Greater Noida on 2nd June, 2015, 04:15 PM

I come to know about Edgefx while searching for the project. I used project based on communication as a keyword in Google to find Edgefx.I decided because it's best among all the sites I visited.Yes delivered on time with all components.No I directly purchased the project through online.No Suggestions required.

Peeyush , Pune on 31st December, 2014, 11:08 AM

The kit delivered on time with right components.The technical support is good.

Rating Breakdown (2 Reviews)

Only Tool kit can not be purchased individually.


Edgefx Technologies Pvt. Ltd.,
Plot No. 105, 3rd Floor,
Liberty Plaza, Himayathnagar,
Hyderabad - 500029,
Telangana, India
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved